$349.00
Class-beating sound shaped to your lifestyle
  • Dolby Atmos® and DTS:X® – setting sound free
  • Dolby Atmos Height Virtualizer
  • Ready for 4K HDR entertainment
  • Smooth and easy Bluetooth streaming
TX-SR393

Get notified when this product becomes available:

Class-beating sound shaped to your lifestyle
  • Dolby Atmos® and DTS:X® – setting sound free
  • Dolby Atmos Height Virtualizer
  • Ready for 4K HDR entertainment
  • Smooth and easy Bluetooth streaming
Dolby Atmos® and DTS:X® – setting sound free

Dolby Atmos® and DTS:X® – setting sound free

Dolby Atmos® and DTS:X® formats allow engineers to map sound anywhere in 3D space, effects moving from speaker to speaker all around the room and wrapping your audience in the latest films and games. You can also enjoy your 3D speaker layout with classic titles. Dolby Surround® and DTS® Neural:X find overhead cues in legacy soundtracks and upmix for awesome spatial realism.
Dolby Atmos Height Virtualizer

Dolby Atmos Height Virtualizer

When playing any Dolby® format, engaging Dolby Atmos Height Virtualizer* enables a more immersive listening experience, creating a virtual surround and height effect from traditional speaker layouts without employing additional surround or height speakers.
* Enabled with a future firmware update.
Ready for 4K HDR entertainment

Ready for 4K HDR entertainment

Enjoy support for HDR (High Dynamic Range) video including HDR10, HLG, Dolby Vision®, and BT.2020. The 4:4:4 color space is also supported. Six HDMI inputs, ARC-ready MAIN OUT, and SUB OUT pass 4K/60p and HDR video from player to compatible TV and projector and all terminals are HDCP 2.2 compliant.
Smooth and easy Bluetooth streaming

Smooth and easy Bluetooth streaming

Whatever audio is playing on your phone, tablet, or PC app can be streamed to the receiver with Bluetooth wireless technology. Once the receiver has paired with and remembered your device, it will start playback automatically whenever it detects an incoming Bluetooth audio stream.

Amplifier

# Channels
5.2
Power Watts/Ch (8 Ohms 20-20kHz, 2 Channels Driven, FTC)
80 Watts, 0.08% THD
Power Watts/Ch (6 Ohms 1kHz, 1 Channel Driven, FTC)
155 Watts, 10% THD
Dynamic Audio Amplification
-
H.C.P.S. (High Current Power Supply)
Non-Phase Shift Amplifier
-
THX Certified
-
Certified 4 Ohms Performance
Discrete Output Stage Circuitry
Amplifier Design
-
Independent Block Construction (Amp/Preprocessor)
-
Bi-amp Capability For Front
-

Processing

Dolby Atmos
32-Bit Digital Signal Processing Engine
Dolby Atmos Height Virtualizer
Dolby Surround® upmixing
Dolby Decoder
Dolby Atmos, Dolby True HD
DTS:X
DTS Virtual:X
DTS Neural:X upmixing
DTS Decoder
DTS:X, DTS-HD Master Audio
Dolby® Pro Logic IIz upmixing for stereo and multichannel soundtracks
-
ONKYO GAME Surround Modes
-
VLSC for Noiseless Audio Processing
-
THX Processing Mode
-
CinemaFILTER
AccuEQ Room Calibration
Phase-Matching Bass Boost
-
Direct/Pure Mode
✓/-
Pure Direct Analog Path Mode
-
Advanced Music Optimizer
384K/32 Bit DACs
192K/24 Bit DACs
-

Connectivity

Analog Audio IN
3
Phono Input
-
Digital Audio IN (OPT/COAX)
1 / 1
Composite Video I/O
-
Component Video I/O
-
Front Panel HDMI
-
Front-Panel A/V
-
USB Input
HDMI I/O
4 / 1
HDMI 4K/60 Hz- Capable HDMI Terminals
HDCP 2.3 Copy-Protection Compatibility
✓(Enabled with a future firmware update)
HDMI Support for High Dynamic Range
HDMI Support for 3D, Audio Return Channel and CEC
BT.2020 Support
HDMI Support for Deep Color, x.v.Color, LipSync
HDMI Support for DVD-Audio, SACD, Multichannel PCM
Analog To HDMI Upconversion
-
1080p to 4K Upscaling
4K Passthrough
Analog Pre-Outs
Dual Subwoofer
Speaker A/+B
-
Powered Zone 2
Powered Zone 3
-
Zone B Line Out
Zone 2 Line Out
-
Zone 2 Video Out
-
Zone 2 Digital to Analog Audio Conversion
-
Zone 3 Line Out
-
Whole House Mode
-
FireConnect Multi-room Audio
-
Airplay
-
Google Cast
-
Supports Onkyo Remote App
-
Internet Radio Capable
-
Spotify Connect Support
-
Tidal
-
Streaming Audio From PC / Network
-
Hi-Res Streaming Audio Formats
-
Streaming Audio From USB memory
-
Wireless Network
-
Bluetooth
✓(Version 4.2, Profile: A2DP 1.3, AVRCP 1.5)

Integration Access

RS-232
-
IR Input
-
IR Output
-
Ethernet
-
ONKYO-RI System Control
-
RIHD (Remote Interactive Over HDMI)
-
12V Trigger
-

Miscellaneous

Pre-Pro/Learning Remote
-/-
On Screen Remote Programming
-
Hybrid Standby Function
Smart Grid-Ready
-
Auto Speaker Calibration W/Mic.
AccuEQ
OSD Out
Solid Aluminum Front
-
Transparent High-Grade Speaker Terminals
-
Detachable AC Cord
-
Warranty
2 YEARS

Amplifier

All Channels
80 W/Ch (8 Ohms, 20 Hz–20 kHz, 0.08% THD, 2 Channels Driven, FTC) 155 W/Ch (6 Ohms, 1 kHz, 10% THD, 1 Channel Driven)
THD+N (Total Harmonic Distortion + Noise)
0.06% (20 Hz–20 kHz, 8 Ohms, 1 Channel Driven, 50 W)
Input Sensitivity and Impedance
200 mV / 47k Ohms (Line)
Frequency Response
10 Hz–100 kHz /+ 1 dB, -3 dB (Direct Mode)
Tone Control
±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio
109 dB (Line, IHF-A)
Speaker Impedance
4 ohms–16 ohms

Video

Video
1.0 Vp–p ±5% / 75 Ohms (Composite)

Tuner

FM
87.5 MHz–107.9 MHz
AM
530 kHz–1,710 kHz
FM/AM Preset Memory
40 stations

General

Power Supply
AC 120 V~, 60 Hz
Power Consumption
445 W
Standby Power Consumption
0.1 W
Dimensions (W x H x D)
17 1/8" x 6 5/8" x 12 15/16" (435 x 160 x 328 mm)
Weight
18.1 lbs (8.2 kg)

Carton

Dimensions (W x H x D)
20 11/16" x 9 7/16" x 15 15/16" (525 x 240 x 405 mm)
Weight
23.1 lbs. (10.5 kg)

UPC Code

(B)
889951001430

TX-SR393 Reviews

  • Perfect pairing for a new 4K UHD system. This unit replaced a 27 yr old Sony Dolby Surround 5.1 receiver. I compared this TX-SR393 to 2 other major brands and this was the only one that has actual volume settings for EACH channel. Movie dialog can be a problem with surround sound. This unit allows full control to raise the center channel and tamp down the front channel. Initial setup via the HDMI is easy. If you use optical link, the front unit display is adequate for settings. Then you can walk through the various settings to adjust to your room — I’m a recording engineer and like to do this manually (it does have the auto-sensing mic). This is the only unit of the 3 I reviewed that has quick treble, dialog and bass touch controls on the front of the unit AND on the remote!
    The other 2 competitors were far too complicated. After spending a lifetime reading tech manuals, I didn’t want to do that to watch a movie in 5.1. I’m running Polk Audio 8″ 2-way bookshelves in front and ceiling mounted JBL satellites for center and rear rolled off <200Hz. No sub-woof mud machine. The Polks have plenty of boom. Our living room is very large and this unit runs about 50%-65% volume for movie viewing. Plenty of headroom. If you're a purist, there is a "Direct" setting that bypasses all of the enhancements to pass signals "as produced" when in good ol' 2ch Stereo mode for your turntable or CD player (no internal TT preamp). Best bang for the buck.

    Mark in FL

  • Nice entry level surround system with many features. Seems to be designed for a soundbar or 3.2 system. When set up for 3.2 both the surround sound and tuner sound great. Set up for 5.2 surround adjustment are needed for the back speakers when switching from surround to tuner. Zone B pre out works well when using my old receiver as an amp however when using both A and B zones together the A zone speaker volume drops. Also the B zone output is weak causing me to turn up my old receiver to 50% to get the same volume of sound I would get at 30% without using the zone B input. The tx-sr393 has plenty of adjustments to fine tune your sound and I am very pleased with the sound quality and volume output.
    Pros: Price and excellent 5.2 surround sound
    Cons: Adjusting rear speakers when listening to music in all stereo mode.

    John

  • Very nice…using Polk Audio main, center and surround speakers. Nice power and a SVS subwoofer picks up the loss that shake the room. Hasn’t failed me yet. Brings me back to my first Onkyo receiver the gold old 929…

    Josh Rice

  • very good

    John Hirschler

  • very good product, thank you

    John Hirschler

Read More Reviews

Add a review

Additional information

Weight 20.944 oz

5 reviews for TX-SR393

  1. very good product, thank you

    John Hirschler

  2. very good

    John Hirschler

  3. Very nice…using Polk Audio main, center and surround speakers. Nice power and a SVS subwoofer picks up the loss that shake the room. Hasn’t failed me yet. Brings me back to my first Onkyo receiver the gold old 929…

    Josh Rice

  4. Nice entry level surround system with many features. Seems to be designed for a soundbar or 3.2 system. When set up for 3.2 both the surround sound and tuner sound great. Set up for 5.2 surround adjustment are needed for the back speakers when switching from surround to tuner. Zone B pre out works well when using my old receiver as an amp however when using both A and B zones together the A zone speaker volume drops. Also the B zone output is weak causing me to turn up my old receiver to 50% to get the same volume of sound I would get at 30% without using the zone B input. The tx-sr393 has plenty of adjustments to fine tune your sound and I am very pleased with the sound quality and volume output.
    Pros: Price and excellent 5.2 surround sound
    Cons: Adjusting rear speakers when listening to music in all stereo mode.

    John

  5. Perfect pairing for a new 4K UHD system. This unit replaced a 27 yr old Sony Dolby Surround 5.1 receiver. I compared this TX-SR393 to 2 other major brands and this was the only one that has actual volume settings for EACH channel. Movie dialog can be a problem with surround sound. This unit allows full control to raise the center channel and tamp down the front channel. Initial setup via the HDMI is easy. If you use optical link, the front unit display is adequate for settings. Then you can walk through the various settings to adjust to your room — I’m a recording engineer and like to do this manually (it does have the auto-sensing mic). This is the only unit of the 3 I reviewed that has quick treble, dialog and bass touch controls on the front of the unit AND on the remote!
    The other 2 competitors were far too complicated. After spending a lifetime reading tech manuals, I didn’t want to do that to watch a movie in 5.1. I’m running Polk Audio 8″ 2-way bookshelves in front and ceiling mounted JBL satellites for center and rear rolled off <200Hz. No sub-woof mud machine. The Polks have plenty of boom. Our living room is very large and this unit runs about 50%-65% volume for movie viewing. Plenty of headroom. If you're a purist, there is a "Direct" setting that bypasses all of the enhancements to pass signals "as produced" when in good ol' 2ch Stereo mode for your turntable or CD player (no internal TT preamp). Best bang for the buck.

    Mark in FL

Add a review

Your email address will not be published. Required fields are marked *