TX-NR3010 9.2-Ch THX Certified Network A/V Receiver
 

Thrill to the Power of Nine-Channel Entertainment

The ultimate hub for house-wide entertainment, the TX-NR3010 can drive audio in three rooms, output high-resolution video on two displays, and stream audio via DLNA—all controlled by your iPhone® or Android-powered phone. With a total of 11 HDMI® ports (including MHL™ for smart phone) and 11.4-channel pre-outs, the home theater setup possibilities are limited only by your imagination. The receiver boasts Audyssey MultEQ® XT32 room correction and three incredible sound expansion systems—DTS Neo:X™, Audyssey DSX®, and Dolby® Pro Logic® IIz—while a combination of Qdeo™, HQV®, and ISF technology upscales and calibrates video sources to 4K resolution. As an audiophile-spec component, the TX-NR3010 features a massive main transformer, additional transformers for audio and video processing, and separated pre-amp and power amp blocks. Audio signals are jitter-cleaned and converted to analog by 192 kHz/24-bit DACs and VLSC™ circuits before passing through the Three-Stage Inverted Darlington Circuitry. The resulting sound quality is awe-inspiring—and with differential DAC mode and digital crossover processing, bi-amping your front monitors results in even higher performance. Easily set up and controlled using the HDMI-enabled user interface, this THX® Ultra2 Plus™-certified receiver is waiting to reignite your passion for music and cinema.

Special Features

  • 9in/2out HDMI Support for 3D, Audio Return Channel, DeepColor™, x.v.Color™, LipSync, Dolby® TrueHD, DTS-HD Master Audio™, DVD-Audio, Super Audio CD, Multichannel PCM, and CEC
  • THX Ultra2 Plus Certified
  • Multi-Transformer for Audio, Video, and Digital Processing
  • 11.4 Multichannel Pre-Outs
  • Network Capability Delivers Internet Radio and Network Streaming
  • Dual Core Video Engine w/ HQV Vida and Marvell Qdeo™ Processing
  • MHL™ (Mobile High-Definition Link) for Smart Phone Content on HDTV
  • Picture-in-Picture Input Source Preview with InstaPrevue™ Technology
  • Zone 2 HDMI Output for HD Video in a Second Zone
  • Digital Crossover Processing Network to Cancel Crossover Interference
  • Direct Digital Connection of iPod/iPhone via Front-Panel USB Port
  • Onkyo Remote App for iPod/iPhone
  • DTS Neo:X, Dolby® Pro Logic® IIz and Audyssey DSX Add New Dimensions to Surround Sound
  • Hybrid Standby Function to Reduce Power Consumption

Amplifier
# Channels 9.2
Power Watts/ch -
Power (8ohms 20-20kHz 0.05%) /Ch 140W (8ohms 20-20kHz, 0.05%, 2 Channels Driven, FTC)
THX Certified Ultra2 Plus
Continuous 6ohms Rated
Certified 4ohms performance
All Discrete Circuitry
3-Stage Inverted Darlington Circuitry
PUSH-PULL Design
Independent Block Construction (Amp/Preprocessor)
Toroidal Transformer -
Independent Power Supply ✓ (4 Transformers)
Bi-amp Capability For Front
Digital Crossover Processing Network
Processing
DOLBY Decoder True HD, DD Plus, PLIIz
DTS Decoder DTS-HD Master Audio, DTS-HD Express
DTS Neo:X
Dolby PLIIz
ONKYO GAME Surround Modes
THX Processing Mode
Audyssey DSX
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Direct/Pure Mode X / X
Music Optimizer ✓ (Advanced)
192K/24 Bit DACs ✓ (Burr-Brown)
VLSC
isf Certified Calibration Control
Connectivity
Audio I/O 8 / 1
Phono Input
Digital Audio IN (OPT/COAX) 3 / 3
Digital Audio OUT (OPT/COAX) -
Composite I/O 5 / 1
S-Video I/O - / -
Component Video I/O 2 / 1
Front-Panel A/V V / R / L
Front-Panel Optical
USB Input Front (made for iPod/iPhone) and Rear
HDMI I/O 9 (7 + 1) / 2
HDMI Support 3D video, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC
Component Video Upconversion -
Analog To HDMI Upconversion
1080p Upscaling ✓ (HQV Vida)
4K (up to 4096 x 2160) Upscaling ✓ (Marvell Qdeo)
Multi-Channel Input -
Analog Pre-Outs 11.4
Speaker A/+B -
Powered Zone2
Powered Zone3
Zone 2 Line Out
Zone 2 Video Out ✓ (Composite, HDMI)
Zone 3 Line Out
U-Port -
iPod Ready ✓ (direct USB input)
HD Radio
Internet Radio Capable ✓ (vTuner, Pandora, Spotify, Rhapsody, Sirius/XM iRadio, Slacker, LastFM iRadio, Aupeo, MP3tunes)
Streaming Audio From PC
Streaming Audio From USB memory
Wireless Network Ready via USB ✓ (optional UWF-1)
Bluetooth Ready via USB ✓ (Optional UBT-1)
PC Input (15 pin D-sub)
Integration Access
RS-232
IR Input
Ethernet
ONKYO-RI System Control
12V Trigger ✓ (Zone 2/3)
Miscellaneous
Pre-Pro/Learning Remote X / X
Back-Lit Remote -
On Screen Remote Programming
Bi-directional Remote Setup via GUI
Activity Based Remote
Color-Coded Speaker Terminals
Auto Speaker Calibration W/Mic. ✓ (Audyssey MultiEQXT32)
OSD Out ✓ (advanced "Home" GUI)
Solid Aluminum Front
Warranty 2 YEARS
General
General
All Channels140 W (8 ohms, 20 Hz-20 kHz, 0.05%, 2 channels driven, FTC)
Front L/R140 W (8 ohms, 20 Hz-20 kHz, 0.05%, 2 channels driven, FTC)
170 W + 170 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
Center140 W (8 ohms, 20 Hz-20 kHz, 0.05%, 2 channels driven, FTC)
170 W + 170 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
Surround L/R140 W (8 ohms, 20 Hz-20 kHz, 0.05%, 2 channels driven, FTC)
170 W + 170 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
Surround Back L/R140 W (8 ohms, 20 Hz-20 kHz, 0.05%, 2 channels driven, FTC)
170 W + 170 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
Dynamic Power320 W (3 ohms, 1 ch)
270 W (4 ohms, 1 ch)
160 W (8 ohms, 1 ch)
THD+N (Total Harmonic Distortion + Noise)0.05% (20 Hz-20 kHz, Rated power)
Damping Factor60 (Front, 1 kHz, 8 ohms)
Input Sensitivity and Impedance200 mV/47 k-ohms (Line)
2.5 mV/47 k-ohms (Phono MM)
Maximum RCA Output Level and Impedance5.5 V/470 ohms (Pre out)
Phono Overload70 mV (MM, 1 kHz, 0.5%)
Frequency Response5 Hz-100 kHz/+1 dB, -3 dB (Direct Mode)
Tone Control±10 dB, 50 Hz (Bass)
±10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio110 dB (Line, IHF-A)
80 dB (Phono MM, IHF-A)
Speaker Impedance4 Ohms–16 Ohms or 6 Ohms–16 Ohms
Video1 Vp-p/75 ohms (Component)
0.7 Vp-p/75 ohms (Component PB/CB, PR/CR)
1 Vp-p/75 ohms (Composite)
Component Video Frequency Response5 Hz–100 MHz, -3dB
FM87.5 MHz–107.9 MHz
AM530 kHz–1,710 kHz
FM/AM Preset Memory40 stations
Power SupplyAC 120 V, 60 Hz
Power Consumption11.0A
Standby Power Consumption0.1W
Dimensions (W x H x D)17 1/8" x 7 13/16" x 18 1/4" (435 x 198.5 x 463.5 mm)
Weight55.1 lbs (25.0 kg)

Purchase the TX-NR3010

ONKYO has chosen a select group of Authorized Dealers which have agreed to provide outstanding service to our customers. Please check the Authorized Internet Resellers page for even more buying options.

Find your Local Dealer